Iron (III) sulfate or Ferric sulfate or Ferric sulphate USP Manufacturers

Anmol Chemicals is the pioneer manufacturers of Iron (III) sulfate or Ferric sulfate or Ferric sulphate Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher Iron (III) sulfate or Ferric sulfate or Ferric sulphate made in an ISO9001, ISO22000 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Iron (III) sulfate or Ferric sulfate or Ferric sulphate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Iron (III) sulfate or Ferric sulfate or Ferric sulphate USP Grade Manufactures

CAS No.: 10028-22-5 anhydrous, 5244-10-7 monohydrate and 142906-29-4, EC Code EINECS: 233-72-9, Molecular Weight: 399.88 g/mol (anhydrous), 489.96 g/mol (pentahydrate), 562.00 g/mol (nonahydrate), Chemical Formula: Fe2(SO4)3 (anhydrous)

Iron (III) sulfate or Ferric sulfate, is the chemical compound with the formula Fe2(SO4)3, the sulfate of trivalent iron. Usually yellow, it is a rhombic crystalline salt and soluble in water at room temperature. It is used in dyeing as a mordant, and as a coagulant for industrial wastes.

Ferric Sulfate USP Specifications
Fe2(SO4)3xH2O (anhydrous) 399.88
Ferric persulfate.
Ferric sesquisulfate.
Ferric tersulfate [CAS 10028-22-5].
Hydrate [CAS 142906-29-4].

Ferric Sulfate is hydrated Fe2(SO4)3. It contains not less than 73.0 percent and not more than 80.0 percent of Fe2(SO4)3.

Identification: Dissolve 0.5 g in a mixture of 50 mL of water and 3 mL of hydrochloric acid: this solution meets the requirements for the Ferric Salts test under Iron.
Limit of insoluble matter: Transfer 10 g in a covered beaker, and dissolve in a mixture of 100 mL of water and 5 mL of sulfuric acid. Heat to boiling, and warm on a steam bath for 1 hour. Filter the hot solution through a tared sintered-glass crucible of fine porosity. Wash the beaker and the filter with hot water, dry the crucible at 105 , cool in a desiccator, and weigh: not more than 2 mg of insoluble matter is found (0.02%).
Limit of chloride: 0.002%.
Limit of ferrous iron: Dissolve 4 g by warming with 50 mL of dilute sulfuric acid (1 in 10), cool, and titrate with 0.1 N potassium permanganate: not more than 0.16 mL is required to produce a permanent pink color (0.02% as Fe++).
Limit of copper: 0.005%.
Limit of zinc: 0.01%.
Limit of nitrate: 0.01%.
Substances not precipitated by ammonia: 0.1%.

Iron (III) sulfate or Ferric sulfate or Ferric sulphate USP Grade Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.